Re: Where do I get a couple Caps

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "john cooper" <tesla-at-tesla-coil-dot-com> 

I still have about 1000 Panasonic metallized polypropylene caps for sale, 
0.0043uF 2500vdc.  They're made for applications where high frequency and 
high pulse are required.  Factory sealed bags of 100 for 45.00 plus 
shipping.  Also, I'll split a bag and will sell 50 for 25.00 plus 
shipping.  I've been using these in my mmc's for 3.5+ years with great 
results, pics on my web.

John


---------- Original Message ----------------------------------
From: "Tesla list" <tesla-at-pupman-dot-com>
Date:  Thu, 22 Apr 2004 17:01:08 -0600

 >Original poster: Tom Wideman <twidem01-at-baker.edu>
 >
 >So is this the kind i want?
 >
 >http://www.cornell-dubilier-dot-com/film/9422000.htm
 >
 >(Part #:942C20S22K (3 one down))
 >
 >Nano2e
 >
 >
 >---- Original message ----
 > >Date: Thu, 22 Apr 2004 12:08:26 -0600
 > >From: "Tesla list" <tesla-at-pupman-dot-com>
 > >Subject: Re: Where do I get a couple Caps
 > >To: tesla-at-pupman-dot-com
 > >
 > >Original poster: Terry Fritz
 ><teslalist-at-twfpowerelectronics-dot-com>
 > >
 > >Hi,
 > >
 > >Look here:
 > >
 > >http://www.thegeekgroup-dot-org/mmc/
 > >
 > >You could use six of the 0.15uF or four of the 0.10 uF.
 > >
 > >Cheers,
 > >
 > >         Terry
 > >
 > >
 > >At 10:04 AM 4/22/2004, you wrote:
 > >>Hey..I am looking for a total .024 uF in my MMC (did I say
 > >>that right (NOOB!)) What should the rated voltage be if I
 >am
 > >>using a 4000V 30mA NST? What kind should they be (I am
 > >>looking at Metallized Polypropylene)? And where can I get
 > >>just a few?
 > >>
 > >>Nano2e
 > >
 > >
 >
 >
 >