[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Flyback Driver boards COMPLETE



Original poster: "Jim Mitchell" <Electrontube-at-sbcglobal-dot-net> 

Pictures are up:  Here's a bad pic of the board,  flash glare,

www.hot-streamer-dot-com/electrontube/temp/fb

  I had a bit of trouble with my
ratsnest set up... o_O  That is the burn mark in the upper left corner.

www.hot-streamer-dot-com/electrontube/temp/dsc01342.jpg

Heres another blurry picture of a flyback making a 1" corona discharge with
40v on the primary.  Any more and the taps start to arc to the core!

Regards - Jim Mitchell


----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Thursday, April 22, 2004 12:42 AM
Subject: Flyback Driver boards COMPLETE


 > Original poster: "Jim Mitchell" <Electrontube-at-sbcglobal-dot-net>
 >
 > Hello list,
 >
 > I recieved the boards today from the PCB house,  I soldered one up and
 > tested it,   they work great,  I was pulling some long arcs off a little
 > flyback.  The MOSFETs don't even get warm because it is using a high
 > voltage ~50-120v at a lower current so the MOSFETs and input diodes stay
 > cool.  Pictures will come soon.
 >
 > Regards - Jim Mitchell
 >
 >