[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Where do I get a couple Caps

To: tesla-at-pupman-dot-com
Subject: Re: Where do I get a couple Caps
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Thu, 22 Apr 2004 12:08:26 -0600
In-Reply-To: <10d9e36f.35189908.81a0200-at-mserve1.baker.edu>
References: <10d9e36f.35189908.81a0200-at-mserve1.baker.edu>
Resent-Date: Thu, 22 Apr 2004 12:12:17 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <xYNaXD.A.ON.AsAiAB-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: Terry Fritz <teslalist-at-twfpowerelectronics-dot-com>

Hi,

Look here:

http://www.thegeekgroup-dot-org/mmc/

You could use six of the 0.15uF or four of the 0.10 uF.

Cheers,

         Terry


At 10:04 AM 4/22/2004, you wrote:
>Hey..I am looking for a total .024 uF in my MMC (did I say
>that right (NOOB!)) What should the rated voltage be if I am
>using a 4000V 30mA NST? What kind should they be (I am
>looking at Metallized Polypropylene)? And where can I get
>just a few?
>
>Nano2e

Prev by Date: Re: Fwd: Re: MHz - VTTC
Next by Date: Re: Flyback Driver PCBs 2 free flybacks left
Prev by thread: Where do I get a couple Caps
Next by thread: Re: Where do I get a couple Caps
Index(es):
- Date
- Thread