Re: Flyback Driver PCBs 2 free flybacks left

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jim Mitchell" <Electrontube-at-sbcglobal-dot-net> 

New offer.  The next 2 people to order a board get two Old Style flybacks.
Pictures of the completed board will be up soon.  Max Spark length I've
gotten with one of my new DC flybacks and this set up was 3" on halfwave DC
with 50v on the primary. (many turn primary)

Regards - Jim Mitchell
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Wednesday, April 21, 2004 9:59 AM
Subject: Re: Flyback Driver PCBs 2 free flybacks left


 > Original poster: Brett Miller <brmtesla2-at-yahoo-dot-com>
 >
 > Jim,
 >
 > Yeah, I think it's great that you were giving away
 > those flybacks, and I still plan on ordering a board
 > when I get my check, it's just that I have never had a
 > problem turning up flybacks and I believe anyone could
 > do it with a little creative scrounging.
 >
 > ...and yeah.  The new less useful ones are more
 > plentiful.
 >
 > -Brett
 >
 >
 > --- Tesla list <tesla-at-pupman-dot-com> wrote:
 >  > Original poster: "Jim Mitchell"
 >  > <Electrontube-at-sbcglobal-dot-net>
 >  >
 >  > Hahaha,  Information Unlimited.  I got a flyback
 >  > from them once,  it was
 >  > very good,  I could draw some hot white arcs from
 >  > it,  sadly it arced over
 >  > internally.   And my point is,  you cannot find the
 >  > old style flybacks as
 >  > easily as the new DC ones.  My other point being
 >  > that I was including a
 >  > *brand new* old style flyback with each board
 >  > purchase
 >  >
 >  > Regards - Jim Mitchell
 >  > ----- Original Message -----
 >  > From: "Tesla list" <tesla-at-pupman-dot-com>
 >  > To: <tesla-at-pupman-dot-com>
 >  > Sent: Tuesday, April 20, 2004 9:46 AM
 >  > Subject: Re: Flyback Driver PCBs 2 free flybacks
 >  > left
 >  >
 >  >
 >  >  > Original poster: Brett Miller
 >  > <brmtesla2-at-yahoo-dot-com>
 >  >  >
 >  >  > Yeah, it's a common misconception based on people
msnip........