Re: Flyback Driver PCB & FLYBACK COMBO First 5 Only!

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jim Mitchell" <Electrontube-at-sbcglobal-dot-net> 

Hi,

This is not a "feedback" style circuit,  It uses a variable oscillator which
you set with a potentiometer.   You connect the primary of the flyback to
the board, as well as a supply for the primary,  and a supply for the logic.
So yes you need an external transformer for the logic section,  but the
flyback can be run from half wave rectified mains if you use 70 or so turns
on the primary.

Regards - Jim Mitchell

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Monday, April 19, 2004 9:24 AM
Subject: RE: Flyback Driver PCB & FLYBACK COMBO First 5 Only!


 > Original poster: "Ryan Molecke" <ryan-at-molecke-dot-com>
 >
 > Hello,
 >
 >      So flybacks generally have leads for primary, flyback, and secondary.
Do
 > you plug both primary and flyback into this circuit baord? Does it require
 > an external DC transformer and cord? I know I'm begging the question to
ask
 > for a schematic...
 >
 > Ryan
 >
 > -----Original Message-----
 > From: Tesla list [mailto:tesla-at-pupman-dot-com]
 > Sent: Friday, April 16, 2004 8:19 AM
 > To: tesla-at-pupman-dot-com
 > Subject: Flyback Driver PCB & FLYBACK COMBO First 5 Only!
 >
 >
 > Original poster: "Jim Mitchell" <electrontube-at-sbcglobal-dot-net>
 >
 > Hello list.
 >
 > For the first five people that purchase a High Powered Flyback Driver PCB.
 >
 > I WILL INCLUDE a Brand New "Old style" flyback transformer with no
internal
 > rectifier And disk shaped secondary FOR FREE.
 >
 > This is for the FIRST 5 people only!
 >
 > Regards - Jim Mitchell
 >
 >