[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: MY SSTC WORKS!!!!!
Original poster: "Arpit Thomas" <arpit-at-inzo-dot-org>
kreso, I'm interested, what arre the specs of your coil?
*********** REPLY SEPARATOR ***********
On 17/04/2004 at 8:21 AM Tesla list wrote:
>Original poster: "Jim Mitchell" <Electrontube-at-sbcglobal-dot-net>
>
>Kreso,
>
>At 30v in I get about 4" sparks with my SSTC... 2CM sounds a tad small Are
>you using the MicroSSTC?
>
>Regards - Jim Mitchell
>----- Original Message -----
>From: "Tesla list" <tesla-at-pupman-dot-com>
>To: <tesla-at-pupman-dot-com>
>Sent: Friday, April 16, 2004 6:38 PM
>Subject: MY SSTC WORKS!!!!!
>
>
> > Original poster: Kreso Bukvic <kreso.bukvic-at-kc.htnet.hr>
> >
> > Yeha. Finaly work from 30 V bench power supply it makes nice 2 cm sparks
>to
> > air. YEHA finaly i have a SSTC.
> >
> > Folowing people deserve to be mentioned because this SSTC would never
>work
> > without them:
> >
> > Terry Fritz and John Tomacic donated parts
> > Steve Ward was tehnical support
> >
> > Yeha
> >
> > Im so excited i cannot wait 220 V
> >
> > Best Regards
> >
> > Kreso Bukvic
> >
> >