Re: Sync Motor Wanted

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Eastern Voltage Research Corporation" <dhmccauley-at-easternvoltageresearch-dot-com> 

No.  If they are the same motors I purchased from Dr. Resonance over a year
ago, they are actually Hysteresis type
synchronous motors.  They have to be re-tuned during every run and will not
resynch to the same position every time.

Dan


 > I would think that if he is offering them for Tesla coil use that they
would
 > be salient pole and powerful enough for a SRSG... But 43$ is a tad more
then
 > I wanted to pay.   No one has any used ones?
 >
 > Regards - Jim Mitchell
 > ----- Original Message -----
 > From: "Tesla list" <tesla-at-pupman-dot-com>
 > To: <tesla-at-pupman-dot-com>
 > Sent: Thursday, April 15, 2004 12:20 AM
 > Subject: Re: Sync Motor Wanted
 >
 >
 >  > Original poster: Terry Fritz <teslalist-at-twfpowerelectronics-dot-com>
 >  >
 >  > Hi DC,
 >  >
 >  > Your's may not be salient pole though?  Also might not be very powerful
 >  > depending on the rotor size?
 >  >
 >  > Cheers,
 >  >
 >  >          Terry
 >  >
 >  > At 09:55 PM 4/14/2004, you wrote:
 >  >
 >  > >Yes, I have some in stock.  1800 RPM at 120 VAC.  $35 plus $8.50
 > shipping.
 >  > >
 >  > >Dr. Resonance
 >  > >
 >  > >Resonance Research Corporation
 >  > >E11870 Shadylane Rd.
 >  > >Baraboo   WI   53913
 >  > >----- Original Message -----
 >  > >From: "Tesla list" <tesla-at-pupman-dot-com>
 >  > >To: <tesla-at-pupman-dot-com>
 >  > >Sent: Wednesday, April 14, 2004 5:37 PM
 >  > >Subject: Sync Motor Wanted
 >  > >
 >  > >
 >  > > > Original poster: "Jim Mitchell" <electrontube-at-sbcglobal-dot-net>
 >  > > >
 >  > > > Hello list,
 >  > > >
 >  > > > Does anyone have a Sync. motor for sale suitable for a SRSG?  I
didn't
 >  > >have
 >  > > > any luck grinding flats into my motor,  it just searches for sync
but
 > wont
 >  > > > lock on.
 >  > > >
 >  > > > Regards - Jim Mitchell
 >  > > >
 >  > > >
 >  > > >
 >  >
 >  >
 >
 >
 >
 >
 >