[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Sync Motor Wanted

To: tesla-at-pupman-dot-com
Subject: Re: Sync Motor Wanted
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Wed, 14 Apr 2004 22:20:22 -0600
In-Reply-To: <005a01c4229d$803bf780$89dd8b45-at-HAL9000>
References: <6.0.3.0.2.20040414173719.026f8c78-at-twfpowerelectronics-dot-com><005a01c4229d$803bf780$89dd8b45-at-HAL9000>
Resent-Date: Wed, 14 Apr 2004 22:23:27 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <HHeLsB.A.muF.94gfAB-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: Terry Fritz <teslalist-at-twfpowerelectronics-dot-com>

Hi DC,

Your's may not be salient pole though?  Also might not be very powerful 
depending on the rotor size?

Cheers,

         Terry

At 09:55 PM 4/14/2004, you wrote:

>Yes, I have some in stock.  1800 RPM at 120 VAC.  $35 plus $8.50 shipping.
>
>Dr. Resonance
>
>Resonance Research Corporation
>E11870 Shadylane Rd.
>Baraboo   WI   53913
>----- Original Message -----
>From: "Tesla list" <tesla-at-pupman-dot-com>
>To: <tesla-at-pupman-dot-com>
>Sent: Wednesday, April 14, 2004 5:37 PM
>Subject: Sync Motor Wanted
>
>
> > Original poster: "Jim Mitchell" <electrontube-at-sbcglobal-dot-net>
> >
> > Hello list,
> >
> > Does anyone have a Sync. motor for sale suitable for a SRSG?  I didn't
>have
> > any luck grinding flats into my motor,  it just searches for sync but wont
> > lock on.
> >
> > Regards - Jim Mitchell
> >
> >
> >

References:
- Sync Motor Wanted
  - From: "Tesla list" <tesla-at-pupman-dot-com>

Prev by Date: Re: Sync Motor Wanted
Next by Date: Re: Books by Dr. R and Bill Wysock
Prev by thread: Sync Motor Wanted
Next by thread: Re: Sync Motor Wanted
Index(es):
- Date
- Thread