[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Flyback Driver PCBs



Original poster: "Dr. Resonance" <resonance-at-jvlnet-dot-com> 

Jim:

If  you wish, drop me a line and I will send you a complimentary large
flyback for your PCB experiments.  Our flybacks are wound with a 70 turn
primary to switch 120 VAC through MOSFETs.  The secondary is 4,200 turns of
#42 AWG.

These units were modeled after some old Zenith color TV HV flybacks that
operated at 25 kV rectified output.  They are silicone encapsulated.

Just provide me your address and I will ship you one for experiments.

Dr. Resonance

Resonance Research Corporation
E11870 Shadylane Rd.
Baraboo   WI   53913


 >
 > After the recent sucsess of my SSTC boards, and my recent experimentation
 > with a high powered flyback driver,  I have decied I'd like to have some
 > flyback driver boards made.
 >
 > The boards would be custom 2 sided boards,  utilizing a half bridge of
 > MOSFETs or IGBTs,  and a variable oscillator and gate drive section.  This
 > would work wonders as a flyback driver and as a GP high frequency
generator
 > for different experiments.
 >
 > The board would use a TL494 oscillator, that way the duty cycle and
 > frequency would be variable.
 >
 > I recently built an identical flyback driver and it works very good,  I am
 > able to drive flybacks with half wave AC up to 150v or until they start to
 > break down from overvoltage (about 50v in)  and I have been able to get 2"
 > sparks from a single small flyback (a new style DC one).
 >
 > Anyway if there is any interest in these please let me know and I will
send
 > word to have them made.  I have already designed the board and things seem
 > to look good.
 >
 > Regards - Jim Mitchell
 >
 >
 >