[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: NEW Self-Resonant COMPLETE SSTC Boards - BULK ORDER
Original poster: "Jim Mitchell" <electrontube-at-sbcglobal-dot-net>
Not at the new PCB company I discovered... You can get ridiculously cheap
boards there.
Regards - Jim Mitchell
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Sunday, April 11, 2004 10:52 AM
Subject: Re: NEW Self-Resonant COMPLETE SSTC Boards - BULK ORDER
> Original poster: "Eastern Voltage Research Corporation"
<dhmccauley-at-easternvoltageresearch-dot-com>
>
> Actually 7x10 was just an estimate. Its actually not that large of a
board
> considering the size of the power components on it.
> I'm actually going to be making separate boards now (one for each
half-power
> section, one the basefeed self-res circuit, and one for the
> external pulse modulator circuit) although I'm probably not going to offer
> them for bulk purchase.
>
> The thing is, that when you do large board orders, a small 5x5 board will
> cost just as much as a 7x10 board in quantity, so you might as
> well take advantage of the "free" extra space.
>
> Dan
>
>
>
>
> > Sounds good, But why don't you try to make the board more compact?
7X10
> is
> > pretty big considering my SSTC boards were 2X3... And the H bridge
being
> on
> > there doesn't account for the large size, I managed to fit an entire
SSTC
> > into a
> > 5 X 6.75" base, see here,
> > www.hot-streamer-dot-com/electrontube/temp/dsc01325.jpg and
> > www.hot-streamer-dot-com/electrontube/temp/dsc01324.jpg
> >
> > It might seem that some people would want to make their own H bridge or
> > Halfbridge that way they could build the coil to their caterings. 45$
> seems
> > like a lot, considering those large SOT-227 IGBTs will cost about
20-30$
> > each depending on where you get them...
> >
> > Good Luck.
> >
> > Regards - Jim Mitchell
>
>