Re: Brass bolt for upper connection?

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: Mark Broker <mbroker-at-thegeekgroup-dot-org> 

You could make a second top plate, with a recess in the center for the 
bolt.  The second plate would be screwed to the PVC endcap using a couple 
nylon screws.  I've done this twice with great success.

Internal baffles are always a good idea, IMO.

Cheers,

Mark Broker
Chief Engineer, The Geek Group


On Fri, 02 Apr 2004 02:36:00 -0700, Tesla list <tesla-at-pupman-dot-com> wrote:

>Original poster: "Hydrogen18" <hydrogen18-at-hydrogen18-dot-com> I'm a PVC endcap 
>on the top of my 3 inch coil. Is it ok to put a brass bolt in it and 
>solder the output wire to it so I can attach toroids easier? Will this 
>make internal flashover a problem?
>
>---Eric
>
>