[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Brass bolt for upper connection?
Original poster: "John Richardson" <jprich-at-up-dot-net>
Eric,
Make sure to put a baffle or two inside the secondary, and there shouldn't
be any problems.
John Richardson
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Friday, April 02, 2004 4:36 AM
Subject: Brass bolt for upper connection?
> Original poster: "Hydrogen18" <hydrogen18-at-hydrogen18-dot-com>
>
> I'm a PVC endcap on the top of my 3 inch coil. Is it ok to put a brass
bolt
> in it and solder the output wire to it so I can attach toroids easier?
Will
> this make internal flashover a problem?
>
> ---Eric
>
>
>