[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 4420 driver ICs

To: tesla-at-pupman-dot-com
Subject: Re: 4420 driver ICs
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Thu, 01 Apr 2004 08:26:43 -0700
Resent-Date: Thu, 1 Apr 2004 08:31:34 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <LTQfbD.A.UhF.OXDbAB-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: Fucian-at-aol-dot-com 

In a message dated 3/31/2004 11:31:14 PM Eastern Standard Time, 
tesla-at-pupman-dot-com writes:

>Question: are the inputs essentially FET gates? They may hold a
>charge which could turn them on the moment the supply rails are
>powered-up if the inputs are not connected to anything. Static
>sensitivity might also be a problem if they are mishandled.
>
>Malcolm

Umm im not sure what you mean...The input to the 4420?Or the MOSFET?The 
input to the 4420 is connected to the antenna...The MOSFET gate is 
connected directly to the 4420 output via a 10ohm resistor.

It seems to be directly linked to the metal enclosure...Dont know why, but 
im throwing it out...

Matt

Prev by Date: Re: single to three phase conversion
Next by Date: Re: MMC problems
Prev by thread: Re: single to three phase conversion
Next by thread: Re: 4420 driver ICs
Index(es):
- Date
- Thread