Re: Toroid Height

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Gerry Reynolds" <gerryreynolds-at-earthlink-dot-net> 

Hi Ed,

Sounds like you need to go to a larger diameter secondary to prevent sec to
pri strikes.  I'm building an 8x36 inch coil with 1.8Kva power source.  I
hope sec to pri strikes will not be a problem.

Gerry R.
Ft Collins, CO

 > The secondary winding length is 27.6", of #22 wire.  The bottom turn of
the
 > secondary is just even with the top plane of the secondary.  It runs at 5
 > kva to 7 kva using a 14.4 kv 5 kva transformer.  Primary capacitance is
.05
 > ufd using a synchronous rotary gap.
 >
 > Ed Sonderman
 >
 >