Re: JAVATC v10

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Adam Horden" <electronicmadman-at-blueyonder.co.uk> 

Hi,

I started writeing a simular version of java tc in Visual Basic a couple of
months ago. Havent touched it in a while as I couldent find out what people
would like to see in a programme like that. Java tc has it all and its made
my VTTC work at lot eaiser.

If I could find a list of formulars for TC work I might drag out the source
and carrry on with it.

There would then be a offline version avaible. With a neat and easy to use
GUI.

Adam
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Tuesday, September 23, 2003 2:56 PM
Subject: Re: JAVATC v10


 > Original poster: Bart Anderson <classi6-at-classictesla-dot-com>
 >
 > Hi Terry,
 >
 > Thank you. I still have updates to make as time allows and more outputs to
 > include (forward transfer impedance, etc.). Gerry has provided several
good
 > thoughts. It would be nice to see a program of this "type/ability" written
 > in C or Java where the program could be compiled to increase speed and get
 > away from browser/javascript limitations, but I'm not the right person for
 > that. Someday someone will do it.
 >
 > Thanks again and take care,
 > Bart
 > PS: Stangenes is working perfectly. Went though various measurements this
 > weekend including planewave calibration etc.. (seems I use the planewave
 > almost exclusively these days as well as the low-z amp). Excellent toys!!
 >
 > Tesla list wrote:
 >
 > >Original poster: Terry Fritz <teslalist-at-twfpowerelectronics-dot-com>
 > >
 > >Hi Bart,
 > >
 > >I just wanted to say THANKS!! for working so hard on this wonderful
program!!
 > >
 > >I incorporates all the latest theory and everything into one program!!
 > >
 > >By far, the most powerful and comprehensive Tesla coiling program out
 > >there now!!
 > >
 > >Cheers,
 > >
 > >         Terry
 > >
 > >
 > >At 09:17 PM 9/19/2003 -0700, you wrote:
 > >
 > >>Hi ALL -
 > >>
 > >>JAVATC version 10 has been in testing for a couple months now. I think
 > >>it's finally ready for all List members to use it as they see fit. It is
 > >>a complete re-write. I wanted to take advantage of Paul Nicholson's
GEOTC
 > >>(the core code which FANTC uses) and pull GEOTC's accuracy into JAVATC.
 > >>This has been accomplished, but was not an easy task. I'd like to say  a
 > >>special thank you to John Couture and Gerry Reynolds for their very
 > >>detailed feedback over the past couple months. I'd also like to thank
 > >>everyone else who tested the program.
 > >>
 > >>JAVATC will now account for walls, ceiling, groundplane, multiple
topload
 > >>objects, and inductive and capacitive variations due to non-linear
 > >>current distribution. JAVATC can now run helical, cone, inv. cone, and
 > >>flat geometry for
 > >
 > >
 > >..........
 > >
 > >
 > >
 > >
 >
 >
 >
 >