[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Best secondary size

To: tesla-at-pupman-dot-com
Subject: Re: Best secondary size
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Tue, 16 Sep 2003 17:06:41 -0600
Resent-Date: Tue, 16 Sep 2003 17:23:18 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <E2YCAC.A._2B.kt5Z_-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Dr. Resonance" <resonance-at-jvlnet-dot-com> 


Divide your winding length by 1,400 to determine wire size.  Then wind.  Use
200 degree C wire.

Dr. Resonance

Resonance Research Corporation
E11870 Shadylane Rd.
Baraboo   WI   53913
 >
 > So i should wind 240 mm pipe with 1400 turns of 0.77 mm wire???? Im sory
but
 > i want to start!!
 >
 >

Prev by Date: RE: A SSTC Ground ?
Next by Date: Re: Primary construction
Prev by thread: Re: Best secondary size
Next by thread: Re: Good News For My Finished MOT Powered Six Inch TC! But Nedd A Little Help Please!
Index(es):
- Date
- Thread