[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Front End



Original poster: "Rick W" <potluck-at-xmission-dot-com> 

Yep.
And it beats moving the stove and plugging in a 50 ft. 4/6 extension into
the receptacle every time you need power like I'm currently doing.

Rick W
Salt Lake


----- Original Message -----
From: Tesla list <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Sunday, September 07, 2003 1:09 PM
Subject: Re: Front End


 > Original poster: "J. B. Weazle McCreath" <weazle-at-hurontel.on.ca>
 >
 >
 > Hello Coilers,
 >
 > One easy solution to getting a decent sized power source for your Tesla
 > coil is to have a licenced electrician install a stove receptacle into
 > the room where you do your coiling activities.  This will provide you
 > with 40 Amps of both 120 and 240 Volt power, and what you do with it
 > beyond the receptacle is your decision.  A stove cord with the molded
 > plug makes a perfect lead to your control panel which can contain the
 > fusing, switches, variac, etc., for your Tesla coil.
 >
 > 73, Weazle, VE3EAR/VE3WZL
 >
 > Details of my "Hyperbaric Gap" and Tesla coil are at:
 > http://www.hurontel.on.ca/~weazle
 >
 >
 >