hooking up T5587 balancing chokes

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: Tesla729-at-cs-dot-com 

Hi all,

I am paralleling (2) 1256D variacs and do have an extra
T5587 balancing choke. I was wanting to make sure that
I hooked the 2 variacs to it properly the first, w/out
the fire works :^) If I'm figuring correctly, I would
just hook each variac to one side of each of the choke
coils (H1 and H3 or H2 and H4) and tie the two remain-
ning leads together as the output of the two paralleled
variacs. Does this sound right?

Thanks,
David Rieben