[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

rotary gap

To: tesla-at-pupman-dot-com
Subject: rotary gap
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Mon, 13 Oct 2003 23:31:44 -0600
Resent-Date: Mon, 13 Oct 2003 23:43:42 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <E8qK0.A.ZUC.Uy4i_-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "RIAA/MPAA's Worst Nightmare" <mike.marcum-at-zoomtown-dot-com> 

Could anyone point me in the right direction (would actually rather buy 
one) in constructing/buying a rsg like the one used in the Electrum 
project? It doesn't need to be rated at 100A rms or anything like that 
(using 60kvdc -at- 250mA after it's reactor doubled). Just need something that 
gives 500bps max and has the shortest dwell time possible without resorting 
to encasing in SF6 or other exotic means.

Prev by Date: Re: Practical Magnifier Design ? ?
Next by Date: Re: Coil woes- where does one get a 60 Hertz strobe?
Prev by thread: RE: Can you identify owner of this vehicle from Richard Hull's? ? ?
Next by thread: Re: rotary gap
Index(es):
- Date
- Thread