[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Help - Primary Supports



Original poster: Tesla729-at-cs-dot-com 

 >It is also available as those plastic cutting boards at the
 >Walmart/Target/Kmart types stores.  It cost much more than getting it
 >direct bulk, but it is "easy".
 >
 >
 >>I actually use this material for my coils and actually have a smaller
 >>piece of UHMW PE for a cover on the supports.
 >>See my picture of my 4" coil below showing the primary supports.
 >>
 >>http://www.spacecatlighting-dot-com/images/ctc1_primary02.jpg
 >
 >Nice!
 >
 >Cheers,
 >
 >         Terry
 >
 >
 >>The Captain
 >..........

Hi Terry,

I just recently purchased a 14x18 poly cutting board at
my local Lowes in the kitchen dept for $8.96.

David Rieben