[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Does anyone recognize this problem?



Original poster: "Robert Hanford" <pomnept-at-comcast-dot-net> 

Hello list, it's a while since I've posted since I haven't been screwing up 
as much lately ! ;^ )
I just made a new toroid, a larger one, for my six inch coil. At the first 
try it worked extremely  well, with nice big rolling streamers. After a 
brief interval I tried it again but this time it mostly just hit the strike 
rail then started to bombard the secondary with hits a short way down and 
near the bottom. Raising the toroid and secondary seemed to make little 
difference in the short time I had. Later on I tried to retune the coil at 
30% power- spark gap was firing, I used a breakout point, but no thirty % 
sparks!!! Just absolutely nothing except my fluorescents were glowing. I'm 
hoping someone will have some ideas for me to keep in mind while I'm 
investigating tommorow.
Best regards from MN,
Robert Hanford