Re: copper washers

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "John Richardson" <jprich-at-up-dot-net> 


Hello,

Please make sure that the sheet is VERY well anchored, or it can get away
from you and shred your fingers.  Learned the hard way.

John Richardson

 > For larger washers, try sheet copper tacked to a piece of plywood. Drill
 > the center holes with a regular drill then cut the outsides with a hole
 > saw, cookie-cutter style. This will eventually kill the hole saw, but you
 > can get many cuts before that.