Re: copper washers

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "RIAA/MPAA's Worst Nightmare" <mike.marcum-at-zoomtown-dot-com> 

is it possible to solder brass ones together (without an acetylene torch)?
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Thursday, November 20, 2003 10:19 PM
Subject: Re: copper washers


 > Original poster: Gregory Hunter <ghunter31014-at-yahoo-dot-com>
 >
 > Why not just use brass washers? They are pretty easy
 > to find and they conduct heat well.
 >
 > --- Tesla list <tesla-at-pupman-dot-com> wrote:
 >  > Original poster: "RIAA/MPAA's Worst Nightmare"
 >  > <mike.marcum-at-zoomtown-dot-com>
 >  >
 >  > Anyone know of a source of copper washers for a
 >  > static vacuum gap? I plan
 >  > on using alternating small and large ones to create
 >  > cooling "fins". The
 >  > local Lowes doesn't have any, just the usual steel
 >  > ones that can't be
 >  > soldered and I heard steel pre-ionizes the gap too
 >  > easily.
 >  >
 >  >
 >
 >
 > =====
 > Gregory R. Hunter
 >
 > http://hot-streamer-dot-com/greg
 >
 >
 >