RE: copper washers

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: Thomas <tom-at-pwrcom-dot-com.au> 

I made some 3" diameter ones by cutting some 1mm thick copper tape with a
hole saw.

 > -----Original Message-----
 > From: Tesla list [mailto:tesla-at-pupman-dot-com]
 > Sent: Friday, 21 November 2003 11:22
 > To: tesla-at-pupman-dot-com
 > Subject: copper washers
 >
 >
 > Original poster: "RIAA/MPAA's Worst Nightmare"
 > <mike.marcum-at-zoomtown-dot-com>
 >
 > Anyone know of a source of copper washers for a static vacuum
 > gap? I plan
 > on using alternating small and large ones to create cooling
 > "fins". The
 > local Lowes doesn't have any, just the usual steel ones that can't be
 > soldered and I heard steel pre-ionizes the gap too easily.
 >
 >