RE: tank circuit

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Mccauley, Daniel H" <daniel.h.mccauley-at-lmco-dot-com> 



1/4 inch tubing is perfect for coils up to a couple of kilowatts.  If
you are using something smaller (less than
a kilowatt), you can use smaller tubing as well.

Buy the flexible refrigeration tubing and don't undwind it.  Once you
build your coilform, lay the coil of tubing
on top and start forming to the pancake coil form.

Dan


 > Would it work ok just to use 1/4 inch coppet tubing for the
 > tank circuit
 > wiring. provided there is enough distance between wires to
 > stop them arcing
 > over?
 >
 >
 >
 >
 >