Re: tank circuit

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jim Lux" <jimlux-at-earthlink-dot-net> 

Yes... this would work just fine.  The frequency is high enough so that in a
good conductor like copper, most of the current is in the outer layer of the
tube.
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Monday, November 17, 2003 6:20 AM
Subject: tank circuit


 > Original poster: "margaret louise" <tullera-at-optusnet-dot-com.au>
 >
 > Would it work ok just to use 1/4 inch coppet tubing for the tank circuit
 > wiring. provided there is enough distance between wires to stop them
arcing
 > over?
 >
 >
 >
 >