Re: HV Cables, Current...

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "D.C. Cox" <resonance-at-jvlnet-dot-com> 

 >From the NST to the spark gap use silicone GTO neon sign xmfr wire.  In the
tank circuit use #4 AWG fine stranded welding cable.  We use #2 00 when
using capacitors larger than .05 MFD.

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Saturday, November 15, 2003 10:14 AM
Subject: HV Cables, Current...


 > Original poster: Dan <toodamtall1-at-yahoo-dot-com>
 >
 > Hi folks,
 >
 > Is it possible to use #4 fine-strand welding cable
 > from the NSTs to the Tank circuit?
 >
 > Another question to ponder;
 > How much current do you think 2, 15/30s with 200mfd.
 > pfc, will draw, with the typical 4" sec. & tank
 > circuit?
 >
 > My debt of gratitude grows farther still.
 >
 > Dan-Ft. Lauderdale
 >
 > _
 >
 >