[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: HV Cables, Current...



Original poster: "Jim Lux" <jimlux-at-earthlink-dot-net> 


----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Saturday, November 15, 2003 8:14 AM
Subject: HV Cables, Current...


 > Original poster: Dan <toodamtall1-at-yahoo-dot-com>
 >
 > Hi folks,
 >
 > Is it possible to use #4 fine-strand welding cable
 > from the NSTs to the Tank circuit?

Yes, but massive overkill.  Consider this: the NST output current maximum,
into a short circuit, is much less than an amp (say, 60 mA).  Heavy wire may
be called for in the primary tank circuit (Primary L, C, and sparkgap loop),
but on the charging side, not really.

 >