[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Cleaning variac surfaces?



Original poster: "Jonathan Peakall by way of Terry Fritz <teslalist-at-qwest-dot-net>" <jpeakall-at-madlabs.info>

I have used a brass brush, then a little fine sandpaper on a nasty one.
Worked great, FWIW.

Jonathan

www.madlabs.info

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Friday, May 30, 2003 11:58 AM
Subject: Cleaning variac surfaces?


 > Original poster: "Terry Fritz" <teslalist-at-qwest-dot-net>
 >
 > Hi All,
 >
 > I have a few never used but older varaics with some tarnish on the bare
 > wire winding surfaces that the brush rides on.  I was just wondering what
 > the best thing to do there is.  ScotchBrite, 400 grit wet/dry , Pink Pearl
 > eraser, leave it as is...?  Nothing bad, just a light spotty black
tarnish.
 >
 > Cheers,
 >
 > Terry
 >
 >
 >
 >
 >