[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: DC Reso Charging
Original poster: "Crow Leader by way of Terry Fritz <teslalist-at-qwest-dot-net>" <tesla-at-lists.symmetric-dot-net>
It's likely your meter did not supply enough voltage to switch on the
internal diodes in the flyback.
KEN
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Sunday, May 25, 2003 4:50 PM
Subject: DC Reso Charging
> Original poster: "Jolyon Vater Cox by way of Terry Fritz
<teslalist-at-qwest-dot-net>" <jolyon-at-vatercox.freeserve.co.uk>
>
> Dear List,
> Would it be possible to implement DC Resonant Charging for a TC with a
dual
> ignition-coil power supply, by using the secondaries of a couple of the
> more modern flyback transformers (the cylindrical models with integral
> rectification) as charging chokes? Using flybacks in this way, would it
not
> be possible to integrate all the rectifiers, charging chokes plus de-Q-ing
> diodes into two small units?
>
> BTW, I did once try to measure resistance of the HT winding of a flyback
> -it is so high that practically impossible to read on a normal multimeter,
> so the current flowing through it in normal operation must be very low -a
> milliamp or two at most.
>
> I would imagine the inductance of the secondary winding of a flyback
> transformer must be fairly high although the Q might not be
> -due to high resistance of the winding might although this might not be a
> bad thing considering the de-Q-ing diode normally included in DC reso
> setups/ what do you think?.
>
> Is it at all likely the current from the ignition coil will damage the
> flyback winding when it is used in this way, and would the total PIV of
all
> the diodes in diode-split winding be likely to be sufficient to withstand
> the reverse voltage?
>
> If it is possible for a flyback secondary to provide the services of a
high
> inductance coil capable of withstanding high voltages
> with the bonus of the diodes to provide rectification and de-Q-ing, are
> there likely to be any other problems which could prevent these coils
being
> successfully used as charging chokes in small DC-reso charging schemes,
> for example, in mini TCs?
>
>
>