Re: Parametric pumping for tesla coils?

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jim Lux by way of Terry Fritz <teslalist-at-qwest-dot-net>" <jimlux-at-earthlink-dot-net>

I make no claims that such a technique is practical or desirable, however, 
it is an alternate way to go about approaching the problem, and stranger 
things have worked out in the past.  If only because it provides an 
alternate conceptual path, it's useful to contemplate.



>Steve and Jim. The idea could work, but problems abound. Most TC's are not
>well timed and to make the theory work you would first nead to design a good
>method of timing as your pump oscilator would have to be precice and a good
>reactance diode to change capacitance at 20Kv is another problem. Try it!
>--   Robert  H
>
>
> > Original poster: "Jim Lux by way of Terry Fritz <teslalist-at-qwest-dot-net>"
> > <jimlux-at-earthlink-dot-net>
> >
> >> Original poster: "Stephen Conner by way of Terry Fritz
> > <teslalist-at-qwest-dot-net>" <steve-at-scopeboy-dot-com>
> >>
> >> At 15:25 15/05/03 -0600, you wrote:
> >>> With this in mind would it not be entirely possible -at least in theory-
> >>> to use these "parametric" methods in the pumping of Tesla coils?
> >>>