[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Magnifier web page



Original poster: "Terry Fritz" <teslalist-at-qwest-dot-net>

Hi Antonio,

Very nice page ;-)  Rain, snow, sleet, and even hail have kept me from 
further testing here.  But I hope to catch the first break in the weather 
for testing quenching and such.

Very interesting about the peak voltage vs. RMS voltage thing and how it 
relates to streamers!

Cheers,

         Terry


At 06:00 PM 5/12/2003 -0300, you wrote:
>Hi:
>
>I have set up a web page showing my 6th-order magnifier:
>http://www.coe.ufrj.br/~acmq/tesla/mag345.html
>
>Mostly what I had already commented in the list. Some pictures
>of the parts, some low-power waveforms, but no spark pictures yet.
>
>The problem about the low rms value of the magnifier output that
>Terry observed, that can lead to smaller streamers even with the
>voltage peaks being higher, is commented. If this is a real problem,
>then there is another interesting problem to solve, that is how to
>obtain the maximum possible rms output, with or without quenching.
>
>The conventional Tesla coil results always in the rms output
>voltage (without quenching) being 50% of the peak voltage. The
>magnifiers in modes k:k+1:k+2 always result in a bit less (~43%).
>Interestingly, The 50% limit can be exceeded with an induction coil
>circuit, with the initial energy in the primary inductor. 6th-order
>versions are possible too. The maximum rms/peak ratio appears to be
>70.7%, when the output voltage tends to a pure sinusoid. But the
>element values are then more suitable for the classical structure
>of the Ruhmkorff induction coil, not for a Tesla coil.
>
>Antonio Carlos M. de Queiroz