[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Water Pig



Original poster: "Crow Leader by way of Terry Fritz <teslalist-at-qwest-dot-net>" <tesla-at-lists.symmetric-dot-net>

A high dielectric constant is truly meaningless by itself. There are
ceramics with k of tens of thousands. We don't have miracle super caps
because of it.

KEN


----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Friday, May 09, 2003 8:59 AM
Subject: Re: Water Pig


 > Original poster: "Jolyon Vater Cox by way of Terry Fritz
<teslalist-at-qwest-dot-net>" <jolyon-at-vatercox.freeserve.co.uk>
 >
 > Does anyone know if carbon fibre or conductive polymer contaminates
 > deionised water?
 > If it does not, what reason would there be not to capitalise on the high
 > dielectric constant of water in building a compact,high capacitance
 > water-dielectric capacitor with plates of woven carbon fibre cloth or
 > polymer other than the resistivity or cost of the conductive materials?
 >
 > Jolyon
 > ----- Original Message -----
 > From: "Tesla list" <tesla-at-pupman-dot-com>
 > To: <tesla-at-pupman-dot-com>
 > Sent: Thursday, May 08, 2003 2:27 PM
 > Subject: Re: Water Pig
 >
 >
 >  > Original poster: "marc metlicka by way of Terry Fritz
 > <teslalist-at-qwest-dot-net>" <mystuffs-at-orwell-dot-net>
 >  >
 >  > water and copper don't stay separated very long. cupric sulfate is a
 >  > very strong conductor.
 >  > Marc
 >  >
 >  > Tesla list wrote:
 >  >  >
 >  >  > Original poster: "Jeremy Scott by way of Terry Fritz
 >  > <teslalist-at-qwest-dot-net>" <supertux1-at-yahoo-dot-com>
 >  >  >
 >  >  > What about tungsten electrodes, sealed in with pure
 >  >  > distilled water via plastic tubing?
 >  >  >
 >  >  > Say all this in a plasic t joint with water
 >  >  > being pumped one way, and electrodes facing
 >  >  > the other way.
 >  >  >
 >  >  > --- Tesla list <tesla-at-pupman-dot-com> wrote:
 >  >  >  > Original poster: "robert & june heidlebaugh by way
 >  >  >  > of Terry Fritz <teslalist-at-qwest-dot-net>"
 >  >  >  > <rheidlebaugh-at-desertgate-dot-com>
 >  >  >  >
 >  >  >  > Ken, The problem is not " can water be used as a
 >  >  >  > dielectric'  The problem
 >  >  >  > is water is a universal solvent that will collect
 >  >  >  > ions from almost
 >  >  >  > everything and will then not be pure.Pure nickel and
 >  >  >  > titanium are among the
 >  >  >  > few electrodes that can be used. Stainless steel
 >  >  >  > will disolve quickley and
 >  >  >  > make THE WATER CONDUCTIVE. Pt and Pd have there own
 >  >  >  > problems.
 >  >  >  >     Robert   H
 >  >  >  > --
 >  >  >  >
 >  >  >  >
 >  >  >  >  > From: "Tesla list" <tesla-at-pupman-dot-com>
 >  >  >  >  > Date: Thu, 01 May 2003 22:51:02 -0600
 >  >  >  >  > To: tesla-at-pupman-dot-com
 >  >  >  >  > Subject: Re: Water Pig
 >  >  >  >  > Resent-From: tesla-at-pupman-dot-com
 >  >  >  >  > Resent-Date: Thu, 1 May 2003 22:53:05 -0600
 >  >  >  >  >
 >  >  >  >  > Original poster: "Jeremy Scott by way of Terry
 >  >  >  > Fritz <teslalist-at-qwest-dot-net>"
 >  >  >  >  > <supertux1-at-yahoo-dot-com>
 >  >  >  >  >
 >  >  >  >  > Hey now,
 >  >  >  >  >
 >  >  >  >  > Water can be a good dielectric :) 1MV/cm
 >  >  >  >  >
 >  >  >  >  >
 >  >  >  >  >
 >  >  >  >
 >  >  >
http://www.eece.unm.edu/cp3/Publications/Shu_Xiao-Repetition_Rate.pdf
 >  >  >  >  >
 >  >  >  >  >
 >  >  >  >  >> If I'm not mistaken, the T&R Electric water
 >  >  >  > cooled
 >  >  >  >  >> transformer somebody got
 >  >  >  >  >> was "recondtioned and certified" too. I've got a
 >  >  >  >  >> printer, I'll certify
 >  >  >  >  >> whatever you want.
 >  >  >  >  >>
 >  >  >  >  >> KEN
 >  >  >  >  >>
 >  >  >  >  >>
 >  >  >  >
 >  >
 >  >
 >  >
 >
 >
 >