[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: figures for spark length/voltage for impulse discharge
Original poster: "Mark Dunn by way of Terry Fritz <teslalist-at-qwest-dot-net>" <mdunn-at-wmwmeyer-dot-com>
Mike:
The AIEE publishes 11.9KV/inch between needle points in Air at a barometric
pressure of 760mm and 25 Deg C.
The rule of thumb that I've always heard was 1000 volts/1.1 mm. This would
suggest 23 KV. Maybe this rule of thumb applies to spherical balls or
silmilar electrodes.
Mark
-----Original Message-----
From: Tesla list [mailto:tesla-at-pupman-dot-com]
Sent: Thursday, May 01, 2003 8:35 AM
To: tesla-at-pupman-dot-com
Subject: figures for spark length/voltage for impulse discharge
Original poster: "Mike Harrison by way of Terry Fritz <teslalist-at-qwest-dot-net>"
<mike-at-whitewing.co.uk>
Does anyone have any rough figures for volts/inch spark length for a single
impulse discharge
between sharp points (Marx generator) ?