Re: Raised secondary problems

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jolyon Vater Cox by way of Terry Fritz <teslalist-at-qwest-dot-net>" <jolyon-at-vatercox.freeserve.co.uk>

The secondary winding I am presently using is 10.875" tall. Should it be
taller?

Jolyon

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Thursday, March 20, 2003 12:08 AM
Subject: Re: Raised secondary problems


 > Original poster: "Dr. Resonance by way of Terry Fritz
<teslalist-at-qwest-dot-net>" <resonance-at-jvlnet-dot-com>
 >
 >
 > Usually the sec., with this type of coil design, is raised approx 3
inches.
 > You need more turns on the sec. coil for optimum output, ie, around
 > 1200-1300.  You also need a nice fat toroid with some more capacitance on
 > the top.
 >
 > If you drive the setup with a sig. generator and oscope you can see the
 > optimum coupling point.
 >
 > Dr. Resonance
 >
 > Resonance Research Corporation
 > E11870 Shadylane Rd.
 > Baraboo   WI   53913
 >
 >
 >