[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Raised secondary problems

To: tesla-at-pupman-dot-com
Subject: Re: Raised secondary problems
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Wed, 19 Mar 2003 17:08:29 -0700
Resent-Date: Wed, 19 Mar 2003 18:49:48 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <Ju5KjB.A.Ua.24Re--at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Dr. Resonance by way of Terry Fritz <teslalist-at-qwest-dot-net>" <resonance-at-jvlnet-dot-com>


Usually the sec., with this type of coil design, is raised approx 3 inches.
You need more turns on the sec. coil for optimum output, ie, around
1200-1300.  You also need a nice fat toroid with some more capacitance on
the top.

If you drive the setup with a sig. generator and oscope you can see the
optimum coupling point.

Dr. Resonance

Resonance Research Corporation
E11870 Shadylane Rd.
Baraboo   WI   53913

Prev by Date: Re: ground rods
Next by Date: RE: Hookup Wire
Prev by thread: Raised secondary problems
Next by thread: Re: Raised secondary problems
Index(es):
- Date
- Thread