RE: ground rods

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Christopher \"CajunCoiler\" Mayeux by way of Terry Fritz <teslalist-at-qwest-dot-net>" <cajuncoiler-at-cox-dot-net>


Lots of good info there. Leaves me wondering if I should
try and memorize it, or just stick with my trusty copy
of the National Electrical Code... Article 250 covers a
lot of ground on grounding (pun intended).

 > -----Original Message-----
 > From: Tesla list [mailto:tesla-at-pupman-dot-com]
 > Sent: Tuesday, March 18, 2003 6:07 PM
 > To: tesla-at-pupman-dot-com
 > Subject: ground rods
 >
 >
 > Original poster: "Jim Lux by way of Terry Fritz
 > <teslalist-at-qwest-dot-net>" <jimlux-at-earthlink-dot-net>
 >
 > I've just put a web page up with some equations and tables for ground
 > rods.  They're taken from IEEE Std 142-1991: IEEE Recommended
 > Practice for
 > Grounding of Industrial and Commercial Power Systems.
 >
 > I haven't put the pretty diagrams in yet, but the tables and text
 > are there.
 >
 > http://home.earthlink-dot-net/~jimlux/hv/grounds.htm
 >
 >
 >