[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: help- how do i hook up an o-scope?

To: tesla-at-pupman-dot-com
Subject: Re: help- how do i hook up an o-scope?
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Tue, 18 Mar 2003 18:19:11 -0700
Resent-Date: Tue, 18 Mar 2003 19:53:18 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <CS6rs.A.EjF.Qu9d--at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Ralph Zekelman by way of Terry Fritz <teslalist-at-qwest-dot-net>" <gridleak-at-bluemarble-dot-net>

I need some help in using an o-scope. Can someone point me in the right
direction?

James,

Your question is very open ended.
There are articles in the Tesla archives.
There are 100s of books on how to use an oscilloscope.
The right direction is probably on an azimuth that takes you to
your public library or a book store. Radio Shack has books on how
to use an oscilloscope.

Ralph Zekelman

Prev by Date: Re: Magnet wire sources
Next by Date: Re: Over-coupled or under-insulated?
Prev by thread: Re: help- how do i hook up an o-scope?
Next by thread: Re: help- how do i hook up an o-scope?
Index(es):
- Date
- Thread