Re: Does my toroid look ok??

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jeremy D. Gassmann by way of Terry Fritz <teslalist-at-qwest-dot-net>" <gassmajd-at-email.uc.edu>

I did a re-post, but I don't think it went through.  On my last email, I 
must have been stupid at the time and forgot to put the link to my website, 
so here it is:  http://jeremyee.tripod-dot-com/jeremyeewebsite/id13.html  Sorry 
for missing that!  Thanks again!

Jeremy Gassmann
At 06:53 PM 3/11/2003 -0700, you wrote:
>Original poster: "Jeremy D. Gassmann by way of Terry Fritz 
><teslalist-at-qwest-dot-net>" <gassmajd-at-email.uc.edu>
>
>Hi group!
>         I just finished a major part of my toroid, which was made from 
> 4.5" black drain piping, 2" clear packaging tape and 2" aluminum 
> tape.  To me it seems that the surface is not nice and smooth and was 
> afraid that this might lead to high corona losses.  Below is the link to 
> my toroid pictures on my web site (feel free to browse my entire site and 
> I welcome any suggestions).  If it is possible, maybe someone can tell me 
> if my toroid looks too rough based on the pictures that I have taken and 
> can help me remedy this problem if it exists.  Thanks in advance!
>
>                 Jeremy Gassmann
>