Re: New SSTC Driver

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "by way of Terry Fritz <teslalist-at-qwest-dot-net>" <Fucian-at-aol-dot-com>

In a message dated 3/8/03 3:24:05 PM Eastern Standard Time, 
tesla-at-pupman-dot-com writes:

>All
> >I'm using a relatively new driver chip for my isolated
> >+/-12VDC through a 4kV BIL GDT (think IGBT/FET driver).
> >The chip I'm using is a UCC3808A-2 available from
> >Digikey for the princely sum of $2.57 ea.
> >
> >P/N 296-11482-5-ND
> >
> >One fixed resistor, one pot, one 1.0nF cap and your
> >tuneable from 50-300KHz.  Add a GDT and two IGBT's
> >you have an open loop 500W SSTC for <20 parts.
> >All I can say is WOW.  Plus is tuneable to 1MHz.
> >


Is it possible to get a schematic of this?

matt