Re: Need Volunteers to check Artwork - VTTC Staccato Controller

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Crow Leader by way of Terry Fritz <teslalist-at-qwest-dot-net>" <tesla-at-lists.symmetric-dot-net>

Why not just build it? It's your project.

KEN
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Wednesday, March 05, 2003 9:08 PM
Subject: Need Volunteers to check Artwork - VTTC Staccato Controller


 > Original poster: "by way of Terry Fritz <teslalist-at-qwest-dot-net>"
<dhmccauley-at-spacecatlighting-dot-com>
 >
 > Well, the design is about complete for the VTTC / SSTC Staccato
Controller.
 >
 > I've already done an initial check on the artwork and would like to
 > hopefully have some volunteers to cross-check this board artwork with
 > the current schematic to make sure there are no errors.  So any help is
 > greatly appreciated.
 >
 > TOP LAYER
 > http://www.spacecatlighting-dot-com/datasheets/sc2026_toplayer.pdf
 >
 > BOTTOM LAYER
 > http://www.spacecatlighting-dot-com/datasheets/sc2026_bottomlayer.pdf
 >
 > SILKSCREEN LAYER
 > http://www.spacecatlighting-dot-com/datasheets/sc2026_silkscreen.pdf
 >
 > SCHEMATIC SHEET 1
 > http://www.spacecatlighting-dot-com/datasheets/staccato_driver_sheet01.pdf
 >
 > SCHEMATIC SHEET 2
 > http://www.spacecatlighting-dot-com/datasheets/staccato_driver_sheet02.pdf
 >
 > Thanks in advance!!!
 >
 > The Captain
 >
 >
 > If you've never checked artwork before, you basically are going trace by
 > trace through the artwork and making sure it agrees with the schematic.
 >
 >
 >