Re: potential transformer

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "by way of Terry Fritz <teslalist-at-qwest-dot-net>" <dhmccauley-at-spacecatlighting-dot-com>

Not this size.  The standard GE 14.4kV, 120VAC 1.5kVA that most of us tesla
coilers use are the PTs which can be run up to 3.5kVA.
This oddball potential transformer listed below is only 750VA and from what
it looks like is either a 2.5kV or 4.5kV output.

The Captain

 > Actually, it is well worth the effort because the PT's can usually run up
to
 > 3.5 kVA without any problems at all in TC duty cycles.
 >
 > Dr. Resonance
 >
 >  >
 >  > It could, but its not really worth the effort since its only rated at
 > 750VA.
 >  >
 >  > Email this individual.  He has lots of these potential transformers for
 >  > sale, the ones rated for 14.4kV primary / 120V secondary at 1.5KVA.
 >  >
 >  > mwstiger-at-prodigy-dot-net
 >
 >  >  > Would this Potential Transformer (ebay #2511558790) work for tesla
coil
 >  >  > use? If you imput 120 VAC, what voltage would you get out?
 >  >  > thanks
 >
 >
 >
 >
 >