[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Good Half-Bridge Schematic?



Original poster: "Adam Horden by way of Terry Fritz <teslalist-at-qwest-dot-net>" <electronicmadman-at-blueyonder.co.uk>

Hi Steven,

What programme do you use to draw the schems for your site?

Thanks,
Adam
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Tuesday, June 24, 2003 2:36 PM
Subject: Re: Good Half-Bridge Schematic?


 > Original poster: "Steven Ward by way of Terry Fritz <teslalist-at-qwest-dot-net>"
<srward16-at-hotmail-dot-com>
 >
 > I have a half bridge schematic with some other goodies in it:
 >
 > http://hot-streamer-dot-com/srward16/FBSSTCsch3.htm
 >
 > Some details about it:
 >
 > http://hot-streamer-dot-com/srward16/FBSSTCconstruction.htm
 >
 > my main site is :
 >
 > http://hot-streamer-dot-com/srward16/
 >
 > this should be good enough.  If not, look for the hvguy-dot-com link on my
 > site, there is loads of info there too.
 >
 > Steve Ward
 >
 >
 > >From: "Tesla list" <tesla-at-pupman-dot-com>
 > >To: tesla-at-pupman-dot-com
 > >Subject: Good Half-Bridge Schematic?
 > >Date: Mon, 23 Jun 2003 22:50:56 -0600
 > >
 > >Original poster: "by way of Terry Fritz <teslalist-at-qwest-dot-net>"
 > ><Robynsaddiction-at-aol-dot-com>
 > >
 > >Hello List,
 > >
 > >        I am wondering if someone can direct me to a good half-bridge
 > >schematic? I did a YAHOO search, and was not able to find anything that I
 > >really
 > >liked. Thanks a million. -Richard
 >
 >