[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: A good PSU for driving a resonator

To: tesla-at-pupman-dot-com
Subject: Re: A good PSU for driving a resonator
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Sat, 19 Jul 2003 12:15:31 -0600
Resent-Date: Sat, 19 Jul 2003 12:18:38 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <ie7mFD.A.gSD.1tYG_-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "G by way of Terry Fritz <teslalist-at-qwest-dot-net>" <bog-at-cinci.rr-dot-com>

Not economically sensible, but it is a great non-traditional way to use an 
inductive heater! ;-)

gregory

>Why would someone spend $4k to drive a coil -at- 450 kHz?  Even a coil wound 
>with 18g wire would not be very large.
>Mike



-- 
"Without ZIM, I am lost."
GeekID#-1229
http://thegeekgroup-dot-org

Prev by Date: Re: Proposal for Tesla Coil Data Base
Next by Date: Differential voltage probes Safety Issues
Prev by thread: Re: A good PSU for driving a resonator
Next by thread: Re: A good PSU for driving a resonator
Index(es):
- Date
- Thread