Re: Manometer

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jonathan Peakall by way of Terry Fritz <teslalist-at-qwest-dot-net>" <jpeakall-at-madlabs.info>

Weazle,

It's around 27" per PSI.

Jonathan

www.madlabs.info

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Monday, July 14, 2003 8:03 PM
Subject: Manometer


 > Original poster: "J. B. Weazle McCreath by way of Terry Fritz
<teslalist-at-qwest-dot-net>" <weazle-at-hurontel.on.ca>
 >
 >
 > Hello Coilers,
 >
 > I finally got around to rigging up a manometer to measure the pressure in
 > my hyperbaric gap.  I used "oxygen tubing" that I obtained from a doctor
 > friend and made a U loop of about 18 inches secured to a piece of wood.
 >
 > I put some water in the tube, marked the static position, then turned on
 > the vaccuum cleaner compressor.  Much to my amazement, it proceeded to
 > blow the water completely out of the tube!  I've obviously got a lot
 > more pressure than I thought!!
 >
 > Does anyone know what the relationship between inches of water and actual
 > pressure in PSI is?  I know what it is for mercury, since altimeters and
 > barometers commonly use it, but I can't find any info on water.
 >
 > 73, Weazle, VE3EAR/VE3WZL
 >
 > Details of my "Hyperbaric Gap" and Tesla coil are at:
 > http://www.hurontel.on.ca/~weazle
 >
 >
 >
 >
 >