Re: triggered gap performance?

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Dr. Resonance by way of Terry Fritz <teslalist-at-qwest-dot-net>" <resonance-at-jvlnet-dot-com>


At this current level, all you need is two 1/2 dia. sparkgaps.  They will
quench if the 1/2 inch electrodes are locked in brass stock.

Dr. Resonance

Resonance Research Corporation
E11870 Shadylane Rd.
Baraboo   WI   53913
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Monday, July 14, 2003 6:09 PM
Subject: triggered gap performance?


 > Original poster: "colin.heath4 by way of Terry Fritz
<teslalist-at-qwest-dot-net>" <colin.heath4-at-ntlworld-dot-com>
 >
 > hi all,
 >          im building a small coil. 2" secondary run off a 7.5KV 30mA
 > transfomer!
 > my question is will a sync triggered gap match the performance of a rotary
 > gap at these low powers?
 > im assuming it will as at the low current quenching should be relatively
 > easy with an air blast!
 > ill be running at a 100bps (im in uk).
 > many thanks
 > colin heath
 >
 >