RE: turn counters was Re: Sewing machine motor

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Mccauley, Daniel H by way of Terry Fritz <teslalist-at-qwest-dot-net>" <daniel.h.mccauley-at-lmco-dot-com>

I agree.  Most beginners (including myself at one time) are very particular
about counting the turns on their
primary.  Its best to just use either software (or equations) to get a size
of your coil taking diameter, aspect ratio,
wire gauge, resonant frequency into account and then just winding it.  Every
coil I've ever wound was always within 5-10% of my planned inductance /
resonant frequency that I planned for.

Dan