[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: magnifer coil and extra coil. What are they for?



Original poster: "Dr.Resonance by way of Terry Fritz <teslalist-at-qwest-dot-net>" <resonance-at-jvlnet-dot-com>


In a nutshell, they multiply the output of a conventional pri/sec system by
increasing the output potential times the operating Q factor of the system.
Typically coeff. of coupling in the pri/sec system is very tight with
increased insulation (to prevent breakdown) and the break rate goes from the
typical 400 pps to around 800-1000 pps.

Terry has data in the archives covering this effect in detail.  The ARRL
Radio Amateur's Handbook has some information on this effect as well.

Dr. Resonance

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Saturday, January 04, 2003 8:16 PM
Subject: magnifer coil and extra coil. What are they for?


 > Original poster: "by way of Terry Fritz <teslalist-at-qwest-dot-net>"
<Beans45601-at-aol-dot-com>
 >
 > What do magnifer coils and extra coils do? are they a part of a tesla
coil,
 > or is it something diffrent? Thanks
 > Adam
 >
 >