[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Splicing Primary Copper Tubing

To: tesla-at-pupman-dot-com
Subject: Re: Splicing Primary Copper Tubing
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Wed, 05 Feb 2003 11:52:37 -0700
Resent-Date: Wed, 5 Feb 2003 11:56:00 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <UqTNr.A.J0.-4VQ--at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Resonance Research Corp. by way of Terry Fritz <teslalist-at-qwest-dot-net>" <resonance-at-jvlnet-dot-com>


You can buy small copper tubing "connectors" to fit the size of tubing you
are using.  These are available in most large hardware stores.

Be sure to use silver solder and silver solder flux.  Don't use standard
lead type solder --- RF resistance too high.

Dr. Resonance

Resonance Research Corp.
E11870 Shadylane Rd.
Baraboo,  WI  53913

Prev by Date: First light - or rather disappointing performance
Next by Date: RE: HV Divider Schematic
Prev by thread: RE: Splicing Primary Copper Tubing
Next by thread: Re: Splicing Primary Copper Tubing
Index(es):
- Date
- Thread