RE: Inner tubes - Failure pictures

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Lau, Gary" <gary.lau-at-hp-dot-com> 

Looks like "top load meets aliens"..  Could you share a few words on the
technique?  Number and size of vent holes, and resulting
presence/absence of gas voids?  Any thoughts on a second attempt?

I'm unfamiliar with the coating you mentioned.  Even if it is
conductive, unless it is solid metal like AL tape, I suspect the
streamers will chew through it.

Thanks, Gary Lau
MA, USA

 >Original poster: "C.T." <ct451-at-yahoo-dot-com>
 >
 >When good foam goes bad:
 >
 >http://www.geocities-dot-com/ct451/toroidart.html
 >
 >I'm thinking of using it after coating it with EMV-LACK from cramolin.
Is
 >it conductive enough to work on a top load?
 >
 >Thanks
 >
 >Chris